LP5394 is a low noise DC power supply with an output noise voltage of 10 µVrms or less. Not only the circuit technology but also the shield structure inside the power supply enables the same level of low noise as a battery.
The LP series achieves not only low noise output, but also excellent temperature stability compared to general DC power supplies. It is suitable as a power supply for electric circuit which measures small signals that is usually affected by noise and voltage stability. Therefore it can be used as a DC power supply for a low noise preamplifier.
LP5393 | |
Output Noise | 10 µVrms or lower (typ.) |
Output Voltage Stability | ±10 ppm/°C (typ.) |
Voltage Setting Range | 3 V, 5 V, 10 V or 15 V F.S.(selectable) |
Output Voltage (Dual) | 0 V to ±15 V (Maximum voltage is the voltage range F.S.) |
Voltage Adjustment | Turns-counting Dial (up to 10 turns) |
Output Current | 0.1 A max. |
NF Corp LP5394 Low Noise DC Power Supply
Please allow 2 - 3 weeks lead time for this new product to arrive.
Comes with a 1 year warranty from the manufacturer.
LP5394 is a low noise DC power supply with a wide voltage setting range.
It is suitable to use as power supplies for sensors and electric circuits that are affected by noise and voltage stability, such as a bias power supply for photodiodes.- Output Noise: 10 μVrms or lower (typ.)
(10 Hz to 20 MHz bandwidth) - Output Voltage Stability: ±10 ppm/°C (typ.)
- Output Voltage: 0 to ±15 V
- Output Current: 0.1 A max.
- Voltage Setting Range:
3 V, 5 V, 10 V or 15 V F.S. - Voltage adjustments turn-counting dial which counts up to 10 turns
- 1/4-rack size
- Output Noise: 10 μVrms or lower (typ.)