N4A03 Pictured
The N4A range of Programmable AC Power Sources provide breakthrough low distortion performance previously unseen from a “Switched Topology” Source, the implementation of a proprietary “6 legged output stage” effectively creates a very high switching frequency for waveform construction – thus providing lower distortion. The N4A offers the unique ability to generate both high frequency power waveforms up to 1kHz as well as low frequency power waveforms down to 0.01Hz. This feature enables the engineer to simulate low frequency power devices such as wind turbines with very low fundamental frequencies. Up until now, switching topologies have suffered from higher distortion levels than that of the more established Linear approach. The introduction of the N4A power sources signifies a new chapter in low distortion AC Power Source technology.
The N4A AC power source range offers compliance to a range of international EMC standards including IEC61000-3-2:2014, IEC61000-3-3:2013, IEC61000-3-11:2001, IEC61000-3-12:2011, IEC61000-4-11:2004, IEC61000-4-13:2002 + A1:2009, IEC61000:-4-17:1999 + A2:2009, IEC61000-4-28:2000 + A2:2009, IEC61000-4-29:2001 and IEC61000-4-34:2007 + A1:2009.
Output Power
30kVA
Bandwidth
1kHz Full Signal, 15kHz Small Signal
Output THD %
Better than 0.3%
Output Phases
3 Phase (Optional 1 phase output)
Maximum Output Current (Continuous)
32Arms/phase
Maximum Output Current (3 second inrush)
64Arms/phase
The N4A AC power sources feature an extremely flexible waveform generator capable of mathematical waveform generation, data point waveform upload and many sequencing functions. Traditionally, switching topologies have struggled to provide total harmonic distortion (THD) figures below 2%. The N4A “6 legged topology” provides less than 0.3% THD and typically 0.1%, the N4A range of AC Power Sources should be considered the best value power generator on the market. Ranging from the N4A06 6kVA model (300Vrms, 20A) to the N4A67 67kVA model (67kVA, 75A /phase) – the N4A will suit a wide range of applications including;
- Aerospace
- Renewable Energy
- Compliant to IEC61000-3-2/12 and IEC61000-3-3/11 Harmonics and Flicker Testing
- Compliant to IEC61000-4-11 Voltage Dips and Interrupts immunity test standard
- IEC61000-4-13 harmonic and inter-harmonic susceptibility test standard
- PWM Inverter Drive Development
- Automotive
- Standby Power
- Battery Development
N4L N4A30 Programmable AC Power Source 30kVA
Very Low Distortion
0.1% Typical
Fully Compliant to IEC61000-3-2, IEC61000-3-3, IEC61000-3-11, IEC61000-3-12, IEC61000-4-11, IEC61000-4-13 (Depending upon model)
Satisfies all IEC requirements
Intuitive User Interface
“Quick Keys” and alpha numerical keypad
Very wide frequency range covering 6 orders of magnitude (0.01Hz ~ 1kHz)
DC & 0.01Hz to 1kHz
Color Display
Real time monitoring and waveform display
200% Current Overload Capability (N4A67 133%)
3 Second 200% Overload Capability
Short Circuit Output Protection
Standard safety circuit
Custom Waveform Generator, Mathematical Harmonic Computation Capability
Add Harmonics Mathematically
Upload waveforms from RAW data
Load waveforms via RS232, LAN or USBPlease allow 6-8 weeks lead time for this new product to arrive.
Contact us at info@stratatek.com for data sheets or more information about this product.