top of page
Fluke 3540 FC Three-Phase Power Monitor and Condition Monitor
This item is a excellent condition used Fluke 3540 FC Three-Phase Power Monitor and Condition Monitor . Calibrated to NIST traceable standards on October 21, 2024. 
 
Comes with: Hard carry case, x3 Fluke iFlex 1500-12 CTs (1500A), Fluke Voltage Leads with x4 Alligator Clips, AC Power Adapter/Charger, and traceable certificate of calibration. All pictures are of the actual unit and included accessories.
 
This item comes with a 6 Month (180 day) warranty. Every pre-owned unit we offer goes through meticulous inspection and NIST calibration to guarantee its reliability and durability.
 
Item is in-stock and located in Texas.
 
International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For more information of clarification, please ask.
 
Will ship worldwide. We make our best efforts to get you the best shipping prices. Contact us for other international rates and we will be pleased to give you a quote. We accept VISA / Mastercard. Paypal is also accepted. Sales to within Canada are subject to 5% GST.  Ontario sales subject to 13% HST.

Fluke 3540 FC Three-Phase Power Monitor and Condition Monitor

$2,849.00Price

  • Wiring configurations    
    1-Φ, 1-Φ IT, Split-phase, 3-Φ wye, 3-Φ wye IT, 3-Φ wye balanced, 3-Φ delta, 3-Φ Aron/Blondel (2-element delta), 3-Φ delta open leg, 3-Φ high leg delta, 3-Φ delta balanced. Currents only (load studies)

     

    Number of voltage inputs    
    4 (3 phases and neutral)

     

    Maximum input voltage    
    1000 Vrms (1700 Vpk) phase to neutral

     

    Input impedance    
    10 MΩ each phase to neutral

     

    Bandwidth    
    42.5 Hz to 3.5 kHz

     

    Scaling    
    1:1, variable

     

    Number of current inputs    
    3, mode selected automatically for attached sensor

     

    Current sensor output voltage    
    Clamp: 500 mVrms / 50 mVrms; CF 2.8
    Rogowski coil: 150 mVrms/15 mVrms at 50 Hz, 180 mVrms/18 mVrms at 60 Hz; CF 4; all at nominal probe range

     

    Bandwidth (-3 dB)    
    42.5 Hz to 3.5 kHz

     

    Scaling    
    1:1 and variable

     

    Resolution    
    16-bit synchronous sampling

     

    Sampling frequency    
    10.24 kHz at 50/60Hz, synchronized to mains frequency

     

    Input signal frequency    
    Mains 50/60 Hz (42.5 to 69 Hz)

     

    Data storage    
    Internal flash memory (not user replaceable)

     

    Memory size    
    Typical 1 offline logging session of 1 week with 1 second intervals. The number of possible logging sessions and logging period depends on user requirements.

     

    Measured parameters    
    Voltage, current, frequency, THD V, THD A, power, power factor, fundamental power, DPF

     

    Averaging interval    
    1 s

     

    Total harmonic distortion    
    THD for voltage and current is calculated on 25 harmonics

     

    Voltage    
    Full cycle RMS (20 ms at 50 Hz, 16.7 ms at 60 HZ)

     

    Current    
    Half cycle RMS (10 ms at 50 Hz, 8.3 ms at 60 Hz)

     

    Power    

    200 ms

     

    Interfaces
    USB-A    
    Firmware updates, max. supply current: 120 mA

     

    WiFi
    Supported modes    
    Direct connection and connection to infrastructure

     

    Security    
    WPA2-AES with pre-shared key

     

    Power supply
    Voltage range    
    Nominal 100 V to 500 V (85 V min to 550 V max) using safety plug input

     

    Mains power    
    Nominal 100 V to 240 V (85 V min to 265 V max) using IEC 60320 C7 input

     

    Power consumption    
    Maximum 50 VA (max. 15 VA when powered using IEC 60320 input)

     

    Standby power    
    <0.3 W only when powered using IEC 60320 input

     

    Efficiency    
    ≥68.2 % (in accordance with energy efficiency regulations)

     

    Mains frequency    
    50/60 Hz ±15 %

     

    Battery power    
    Li-ion 3.7 V, 9.25 Wh, customer-replaceable

     

    On-battery runtime    
    Up to 4 hr (up to 5.5 hr in energy saving mode)

     

    Charging time    
    <6 hr

    • Measures:
      • Single, split, or three phase loads
      • Voltage, current, and frequency
      • Active power, non-active power, and power factor
      • Total harmonic distortion
    • Wireless data collection or internal memory sufficient for 1 week with 1 second data intervals
    • Remotely monitor real-time and historical power variable data
    • Visualize data with software trending, graphing, and timeboxing
    • Auto-generated alarms when power variables deviate from pre-set thresholds
    • Power options: Battery, power supply, or power from the measurement line
    • Size: (W x H x D) 7.8 in. x 6.6 in. x 2.2 in.
    • IP Rating: IP 50; IEC 60529
bottom of page